When you are in a small space, such as your home, you can easily clean the floor with a traditional mop. However, when you are in a larger area, such as a shopping mall or warehouse, using a traditional mop will be very inefficient. Are you troubled by this? Don't worry.
Commercial floor scrubbers are key tools for improving cleaning efficiency and ensuring clean and safe floors. It can solve your problems.
In this article, we will provide a step-by-step guide to help you use commercial floor scrubbers correctly, safely, and efficiently.
Choosing the right “weapon”: walk-behind vs. ride-on
1. Walk-behind scrubber
You can think of a walk-behind floor scrubber as a powerful “super mop.” The operator follows behind the machine, guiding it forward by holding onto the handle.
This type of machine is ideal for cleaning medium-sized areas or spaces with many obstacles, such as retail stores, school hallways, or hospital wards.
Its main advantage lies in its flexibility. Due to its relatively small size, it can easily navigate narrow passages, maneuver around shelves and furniture, and even clean small spaces such as elevators. If you need a machine that can efficiently clean while also handling corners and edges, a push-type floor scrubber is a highly reliable choice.
2. Ride-on scrubber
As the name suggests, the operator sits on the machine and drives it to clean, just like driving a small car. This makes the cleaning process very easy, especially when continuous work for several hours is required. Ride-on floor scrubbers are designed entirely for large, open spaces.
The most notable advantage of ride-on floor scrubbers is their unmatched efficiency. They feature wider cleaning paths and larger water tank capacities, enabling them to quickly cover vast areas such as warehouses, shopping malls, airport terminals, and large parking lots. If you manage a large floor area, using ride-on floor scrubbers will significantly save time and labor costs. In addition, it can reduce the physical strain on employees. A ride-on floor scrubber can clean 5,000 square meters per hour, which is equivalent to the work of 10 cleaners.
Site preparation: clearing obstacles for the machine
Key Steps: Before starting the machine, there is one thing you must be clear about: you first need to use a dustpan, sweeper, or other cleaning tools to remove large pieces of trash, screws, packaging tape, wood shavings, etc., from the floor.
This step is essential to prevent clogging of the water suction bar and to avoid damage to the brush plate and rubber strip. Proper site preparation ensures smooth machine operation and reduces potential downtime. Failing to clear large debris in advance increases the risk of machine malfunction.
Careful preparation: selecting the right brush deck and cleaning agent
Cement floors, epoxy floors in warehouse: We recommend using a hard brush disc with good wear resistance, as this will allow you to effectively remove tire marks and oil stains.
Tiles and marble in the Shopping mall: We advise you to use a soft brush or red/white scouring pad to avoid scratching the floor.
Cleaning agent selection: We recommend low-foam floor cleaning agents. You should choose different cleaning agents based on the type of stain (such as oil stains or dust). And strictly dilute them according to the specified ratio to avoid excessive foam affecting water absorption or damaging the machine.
Core operations and efficiency techniques
1. Ensure mall floor safety: The secret to cleaning and drying at the same time
- Adjusting the squeegee: It is crucial to adjust the angle and pressure of the squeegee. You need to ensure that the rubber strip is tightly pressed, and then the floor can achieve “clean and dry” results. In this way, the operation can avoid the risk of customers slipping.
It is important to consider pedestrian movement before operating cleaning equipment. To ensure safety, place "Caution: Slippery" signs around the cleaning zone as part of standard operating procedures.
2. Plan the most efficient cleaning path:
- “S” path method: For large open areas in warehouses, we recommend using an “S” path similar to that of a lawn mower, with each pass overlapping slightly (approximately 10-15 cm) to ensure that no areas are missed and to avoid duplication of work.
- “Outside first, inside later” method: First, clean along the walls and edges of the shelves, cleaning the boundaries thoroughly, and then clean the large area in the middle. This will prevent difficult-to-clean corners from being left behind at the end.
- Zone Segmentation Method: For extremely large spaces (such as large logistics centers), it is recommended to divide the site into several zones and clean them one by one. In this way, it facilitates your management and progress tracking.
3. Advanced techniques for ride-on floor scrubbers:
- Control speed and water volume: You can adjust the water volume according to the degree of dirtiness in the area. In areas with less dirt, you can increase the speed and reduce the water volume; in areas with heavy dirt, you should slow down and increase the water volume to allow the brush disc sufficient time to clean.
- Turning technique: When turning, you need to slow down appropriately and lift the squeegee in advance, then lower it after turning. This operation can prevent watermarks from being left behind.
The “Double Scrubbing Technique” for removing stubborn stains (such as forklift tire marks)
- First: Only place the brush plate down to scrub (do not turn on the water suction function), and allow the cleaning agent to remain on the stains for 1-2 minutes to break them down.
- Second: You need to drive the machine over the area again, this time with both the scrubbing and water suction functions turned on to thoroughly suck up the dissolved stains. This is a very practical and professional technique that can greatly improve your cleaning efficiency.
Post-Use Cleaning and Maintenance: the key to extending the life of the floor scrubber
Do you know? Finishing cleaning does not mean completing all things. There is still one important step that you need to take. In that way, all your work is completed. What is the next step? That is to perform post-use maintenance correctly. This not only maintains optimal performance but also significantly extends its lifespan.
1. Empty and flush the recovery tank:
First, you need to push the machine to the drain area, then get that dirty water out of the tank. Next, use the clean water to rinse the tank.
You need to perform the above steps instantly; otherwise, there will be odors and bacterial growth.
In addition, the solution tank (the clean water one) also needs cleaning, so you can use a hose or a bucket of clean water to rinse it. This step can prevent chemical buildup and keep everything fresh.
2. Clean the brush disc and squeegee
- Brush disc/ pad: After removing the brush plate or scrub pad, you need to rinse it thoroughly with clean water and remove any hair, threads, or debris that may be wrapped around it. Make sure they are completely dry before reinstalling them.
- Squeegee: Check the squeegee's scrape for residue. If so, wipe clean with a damp cloth. If the scraper is worn, it should be replaced in time to ensure the water absorption effect.
3. Charging and storage
- Charging: This is easy, but many people tend to forget this step. Therefore, do not connect the machine to the charger for charging. Make sure the battery is fully charged before the next use.
- Storage: Store the machine in a dry, well-ventilated place. When storing, it is best to lift the brush deck and squeegee to avoid deformation caused by prolonged contact with the ground.
Conclusion
For large areas, such as restaurants, small shopping malls, and small factory workshops, if you keep using a traditional cleaning machine, the working efficiency is very low. But we have a solution to improve working efficiency in these large areas. Commercial scrubbers are specifically designed for cleaning large areas. A commercial floor scrubber is not just a piece of equipment you buy; it is an investment in your company's operational efficiency, working environment, and brand image. As long as you use the correct cleaning steps, it can benefit you a lot.
Want to know which commercial scrubber is best suited for your areas?
With its excellent performance and wide applicability, the LVTONG floor scrubber is your ideal commercial
cleaning partner. We are committed to making these scrubbers.
Offering a wide range of floor scrubbers: walk-behind and ride-on models
Suitable for a wide range of floor types: cement floors, epoxy floors, emery wear floors, tile and marble floors, as well as PVC and rubber floors, etc
Suitable for a wide range of applications: logistics warehouses, healthcare, hotels, schools, airports, factories, and supermarkets
Pursuing quality, durability, and reliability in products: designed with a high-strength body
and chassis
We promise to provide perfect quality, long service life, and excellent performance. Contact us today to start a new chapter in your cleaning career and let LVTONG be a powerful boost for your business success!
