How to Use a Ride on Scrubber Drier: Easy Steps

29/08/2025

In modern large commercial and industrial sites, keeping the floor clean is not only about environmental hygiene, but also about work efficiency and safety. As a powerful floor cleaning machine, the ride-on scrubber has been chosen by many people.

Whether it's a warehouse, factory, or large shopping mall, operating the cleaning equipment correctly improves the speed and quality of cleaning work.

In this article, we will tell you the basic operating steps and key tips of the ride-on floor scrubber to help you easily operate this device and make you achieve efficient and professional floor cleaning results.

What is a Ride-On Floor Scrubber Drier?

A ride-on floor scrubber is basically like a small cleaning car. When you sit on and control the floor cleaning machine correctly, it can scrub, wash, and dry your floors all in a single pass.

Making a Preparation before Using the Ride-on Floor Scrubber

Security check

Wear safety gloves and shoes: The two simple actions that you'd be surprised how often people overlook. Wearing gloves prevents chemical injuries. A wet floor has the risk of slipping; wearing safe shoes prevents accidental slips.
Clean area inspection: Do a quick walk around your cleaning zone, too. Make sure there aren't loose cords, boxes, or other items that'll get in your way mid-clean.
Device inspection:
- If cordless, check that your batteries are sufficient. Otherwise, it will influence your work. Give those brushes a look — worn or dirty, replace them.
- Check whether the squeegee scraper is intact to ensure that it can be effectively scraped. Don’t overlook these steps. Some users do not check their device before starting, resulting in operating the floor cleaning machine unsmoothly.

Setting up your cleaning solution

Choose the right cleaner: Do not use cleaning products carelessly. Use the recommended cleaning agent and mix it in the appropriate proportions.

How to Use a Ride-on Floor Scrubber: Step by Step

Starting the machine: Sit on the seat, buckle up if it has a seatbelt (safety first, after all), then press the power button to start it up.

Turn on the brushes and water spray: Allow the system to take a moment to gear in smoothly. Don't hurry this process.

Adjust settings for different floor types: Not all floors are the same. Various types of floors need different cleaning pressures.

Softer floors, like vinyl or polished rock, need a lighter touch — so please reduce the pressure and water.

Hard floors, like industrial tile or concrete, can withstand stronger pressure, so please increase pressure for a deep clean.

Operating at a steady speed: Too fast or too slow will cause poor cleaning results. When you control it at a steady speed, this way can help you clean entire areas evenly.

Maintain a straight path: As you come to the completion of a row and turn to start the next one, make sure to overlap your last pass by an inch or two. It is a great method for not allowing any skipped, dirty stripes on the floor.

Dealing with tricky spots and tight areas: The cleaning equipment is relatively huge, but in some sticky spots or tight corners, the scrubber sometimes won't reach. Not a problem. Take a few passes over those spots or adjust the pressure to clean them.

As for the extremely tight spaces, you need to use the other cleaning machine.

Cleaning and Maintenance After Using the Ride-on Scrubber

Using the ride-on scrubber floor cleaning equipment to clean the floor well doesn’t mean the job is done. There are some important steps that you need to take.

Empty and rinse the recovery tank: When you're done cleaning, don't let that nasty water sit in your tank. Dump it out, rinse it well, or your machine's going to smell and might gum up.
Clean the brushes and pads: Take off the brushes and pads and rinse them with clean water. Don’t quickly put them back on, because wet pads are just nasty and can encourage mold.
Battery care: If your scrubber runs on batteries, charge it up as soon as you’re done. Don’t wait for it to die completely — that’s a quick way to kill your battery’s lifespan.
Regular maintenance: Finally, rapidly sweep over the exterior of the machine to check for any obvious looseness or harm. Regular maintenance can extend the lifespan of the scrubber machine and save on the cost of repairs.

Common Mistakes You Need to Avoid

Too much water: Excessive wetting can cause floors to become slippery or damage certain surfaces—this is absolutely undesirable.
Inadequate preparation: Like not sweeping the floor or vacuuming, these will cause blockages inside or outside the machine, or lead to the spread of contamination.
Insufficient safety awareness: Failing to promptly set up slippery floor warning signs will increase the risk of slips.
Ignoring regular maintenance: You find cleaning the machine a hassle, but if you overlook this step, it will lead to severe wear or damage to some parts, like brush discs or squeegees.

Is a Ride-on Floor Scrubber Right for You?

It depends on your cleaning areas. If you are working in retail stores, factories, hospitals, or any area with vast floor space, you will definitely feel the difference. Trust me, these will give you a surprise.

FAQs

What floor area does a ride-on floor scrubber clean per single charge?

Generally, you’re going to achieve between 2,000 and 5,000 square meters per full battery charge, based on the model.

Is it possible to use a ride-on floor scrubber on every floor type?

They’re wonderful on hard surfaces like tile, hardwood, sealed stone, or concrete. But I wouldn't use them on carpet or delicate wood.

Can I use any detergent in the machine?

You should choose the detergent according to the type of floor and the need for cleaning. Good advice is that you can use the manufacturer’s recommended cleaning agent. Adding improper chemicals will not achieve a good cleaning result, and it can damage your floors or clog up the machine.

How often should the machine’s brush deck or squeegee be replaced?

It depends on your usage frequency and floor type. Generally speaking, when you notice significant wear on the bristles, a bad water absorption situation, or many water marks on the floor, it’s time to consider replacing the mop.

Why does the machine suddenly stop working during the cleaning process?

There are many reasons. The most common reason is that the battery is low, so you need to make sure the battery is sufficient before operation. It’s also possible that the brush disc or squeegee is jammed by debris.

Conclusion

Ride-on floor scrubbers, with their convenience and high-efficiency advantage, are increasingly gaining popularity as cleaning tools applied in contemporary commercial and industrial settings.

If you master the appropriate method of use and tips of daily maintenance, it can not only help you face all kinds of cleaning challenges with ease but also extend the machine’s lifespan. Finally, it can create a safer and more efficient working environment for you.

By mastering these operating steps, we trust that you have already taken the first step toward becoming a professional cleaning expert. Now, all you need is reliable equipment to put these skills into practice.

Ready to operate the ride-on scrubber to create a clean environment?

LVTONG's ride-on scrubbers are designed to provide efficient, convenient, and thorough cleaning solutions for all types of large areas. They can easily remove stubborn stains and clean far beyond manual effort, and leave no trace after cleaning.